Lake Charles Transmission Line Construction Project

Lake Charles Transmission Line Construction Project

Lake Charles Transmission Line Construction Project

Type: Transmission
Scope: Rebuilt 15 miles of 230kV plus 6.8 miles of 500kV transmission lines.
Location: Lake Charles, Louisiana

Client: Entergy Corporation

Entergy Louisiana (an Entergy Corporation subsidiary) is a power provider serving over 1 million customers across 58 parishes in Louisiana. In October 2016, Entergy contracted Dashiell Engineering (a Quanta Services company (PWR:NYSE)) to reconstruct 15 miles of 230kV and 6.8 miles of 500kV transmission line near Lake Charles on a turn-key basis.

Irby (also a Quanta Services company) was subcontracted to Dashiell to rebuild the lines, including foundations, steel, and concrete poles. Irby was assisted by Auger Services for pole setting/foundations and WInco for helicopter wire operations. Irby also performed conductor stringing works (1 mile) across the Calcasieu River. The project was completed in February 2018 to schedule and without lost-time incident.

Start Date: October 2016
Completion Date: February 2018

 

If you would like to request information on this project or submit a request for bid, click here. 

 

Valliant-Northwest Texarkana 345kV Transmission Line Construction Project

Valliant-Northwest Texarkana 345kV Transmission Line Construction Project

Valliant-Northwest Texarkana 345kV Transmission Line Construction Project

Type: Transmission
Scope: Constructed 43.5 miles of 345kV transmission line in Northeast Texas.
Location: New Boston, Texas

Client: American Electric Power

In April 2016, Irby Construction was awarded the contract for the construction of the Valliant to Northwest Texarkana Transmission Line project for AEP Southwestern Electric Power Company and AEP Oklahoma Transmission Company.

The project consisted of the installation of 43.5 miles of 345kV single steel pole transmission line on anchor-bolted foundations. Irby was supported by Erickson Air Crane and Winco for helicopter pole erection work scopes (Irby and Winco are Quanta Services subsidiary companies (PWR:NYSE)). The project was completed on time and with zero lost time incidents in January 2017.

Start Date: April 2016
Completion Date: January 2017

 

If you would like to request information on this project or submit a request for bid, click here. 

 

Gray-Allen Creek 345kV Transmission Line Construction Project

Gray-Allen Creek 345kV Transmission Line Construction Project

Gray-Allen Creek 345kV Transmission Line Construction Project

Type: Renewables, Transmission
Scope: Constructed 25 miles of 345kV transmission line in support of a North Texas wind project.
Location: Pampa, Texas

Client: Cross Texas Transmission

Founded in 2008, Cross Texas Transmission (“CTT”) is a regulated transmission service provider providing energy to wholesale markets across Texas. The bulk of CTT’s capacity derives from its owned and operated network of transmission lines (>320 miles) which delivers wind power from the Texas Panhandle to its customers.

In January 2016, CTT contracted Irby to incorporate power from the Salt Fork Wind project in Gray and Donley Counties by constructing 25 miles of 345kV transmission line. The Irby work scope included the installation of steel structures, foundations, and wire operations. Irby was assisted by Aldridge Construction (direct embed drilling and structure setting), Winco Powerline (lead-in installation and diverters), and B&M Telecom (Fiber splicing). Both Irby and Winco Powerline are Quanta Services subsidiary companies (PWR:NYSE).

The project was completed in August 2016 to schedule and with zero lost-time incidents.

To learn more about this project watch this video.

Start Date: January 2016
Completion Date: August 2016

 

If you would like to request information on this project or submit a request for bid, click here. 

 

Burnt Church-Tradeport 115kV Transmission Line Construction Project

Burnt Church-Tradeport 115kV Transmission Line Construction Project

Burnt Church-Tradeport 115kV Transmission Line Construction Project

Type: Transmission
Scope: Performed a 12.2 mile 115kV transmission line construction project in an environmentally sensitive coastal salt marsh.
Location: Brunswick, Georgia

Client: Georgia Transmission Corporation

In 2013, Georgia Transmission Corporation (“GTC”) contracted Irby to construct a 12.2 mile 115kv transmission line south of Savannah, Georgia including a 4 mile section through a protected salt marsh.

In service of the Coastal Electric Cooperatives service area, the project connected two radial transmission systems (Burnt Church and Tradeport) in Bryan and Liberty counties. In observance of the projects environmental sensitivity, Irby adapted a construction solution whereby poles were set by an Erikson S-64 Aircrane helicopter to minimize the impact to marshland ecosystems.

Completed on time and within strict environmental parameters, the project exemplified Irby’s capability to plan and execute novel technical solutions to the highest standards of environmental best practice.

To see more on this project, watch the project video produced by Georgia Transmission.

Start Date: April 2013
Completion Date: December 2013

 

If you would like to request information on this project or submit a request for bid, click here. 

 

Ohio River Crossing 345kV Transmission Line Construction Project

Ohio River Crossing 345kV Transmission Line Construction Project

Ohio River Crossing 345kV Transmission Line Construction Project

Type: Transmission, Water Crossing
Scope: Constructed a 2.42 mile 345kV river crossing including two 420 ft lattice towers.
Location: Bedford, Kentucky
Client: Kentucky Utilities

Kentucky Utilities, a subsidiary of PPL Corporation, is an electric utility which serves over 500,000 individuals throughout Virginia and Kentucky. Between August and December 2008, Kentucky Utilities contracted Irby to perform a 2.42 mile 345kV double circuit line crossing of the Ohio River.

The work scope included structure and wire installation work scopes including two 420 foot lattice towers for the river crossing. With foundation support from Can-Fer (Irby and Can-Fer are Quanta Services subsidiary companies PWR:NYSE)), the project was completed, on-time, to budget, and without lost time incident.

Start Date: August 2008
Completion Date: December 2008

 

If you would like to request information on this project or submit a request for bid, click here.